Dreame CU20 Pro Carpet Cleaner: 100°C Steam and 18,000Pa Suction for Deep Cleaning
Share
The Dreame CU20 Pro is a carpet and upholstery cleaner that combines 18,000Pa suction with 100°C steam injection to deep-clean carpets, sofas, mattresses, curtains, and windows in a single unit. Steam penetrates deep into carpet fibres to dissolve set-in stains and kill bacteria and allergens without chemical cleaning agents, making it suitable for homes with children, pets, or allergy sensitivities. After cleaning, carpets dry in approximately 30 to 40 minutes due to the powerful suction extracting most of the moisture during the pass.
Key Features
Instant steam generation means the CU20 Pro is ready to use within seconds of being switched on, with no wait for a tank to heat up. The suction and steam work simultaneously, so stain treatment, deep cleaning, and moisture extraction all happen in one pass rather than requiring a separate dry pass after steam application. This simultaneous approach reduces the total time spent on each surface compared to a two-stage steam-then-extract method.
The cleaning head is designed to reach multiple surfaces without changing attachment. Flat carpet, tight sofa seams, padded headboards, and window glass are all achievable with the same head, covering the common household surfaces that accumulate embedded dirt and odours over time. Operating without chemical cleaning solutions means there is no residue left in fibres after cleaning, which is relevant for households where chemical sensitivity or child safety is a consideration.
Who Is It Suited To?
The CU20 Pro suits households with carpeted areas, upholstered furniture, or soft furnishings that accumulate embedded dirt and odours that a regular vacuum cannot fully address. It is particularly useful for pet owners, where pet dander, hair, and odours penetrate deeply into soft surfaces, and for homes where allergens in soft furnishings are a concern. Those who need a portable spot-cleaning solution rather than a full-size unit may find the Dreame N20 portable steam spot cleaner better suited to targeted use.
Technical Specifications
| Specification | Detail |
|---|---|
| Suction power | 18,000 Pa |
| Steam temperature | 100°C (instant steam generation) |
| Surfaces | Carpet, sofas, mattresses, curtains, windows |
| Dry time | Approximately 30 to 40 minutes after cleaning |
| Cleaning solution | Not required (steam only) |
Where It Fits in the Range
The CU20 Pro occupies the dedicated deep-clean category in Dreame's floorcare lineup, targeting embedded staining in soft surfaces that robot vacuums and stick vacuums cannot address. For everyday hard floor maintenance, Dreame's wet and dry vacuums and robot vacuums cover those surfaces. The CU20 Pro complements those tools for periodic deep cleaning of carpet and upholstery. Browse the full floorcare range at Everyday Home Living to compare across cleaning categories.
Does the CU20 Pro require cleaning solution?
No. The CU20 Pro uses steam alone to clean and sanitise surfaces without chemical cleaning agents. Water is the only consumable required.
How long do carpets take to dry?
Carpets typically dry in approximately 30 to 40 minutes after cleaning, as the 18,000Pa suction extracts most of the moisture during the cleaning pass. Drying time varies with carpet thickness and room temperature.
Can it be used on upholstered sofas and mattresses?
Yes. The cleaning head is designed for use on carpet, sofas, mattresses, curtains, and window glass without changing attachment.
Is it safe for use around children and pets?
The CU20 Pro cleans without chemical agents using steam only, leaving no chemical residue in fibres. Allow cleaned surfaces to dry fully before use by children or pets.
The Dreame CU20 Pro delivers simultaneous 100°C steam and 18,000Pa suction for deep cleaning of carpets and upholstered surfaces without chemical agents. View the Dreame CU20 Pro product page, or explore the full floorcare range at Everyday Home Living.